View Full Version : Sealink Trailer stud pattern?
simmo2001
26-03-2008, 05:29 PM
Can anyone tell me the stud pattern for 5 stud 13" wheels on a 2006 sealink trailer?
Cheers
DAVE_S
26-03-2008, 06:41 PM
i think you will find its holden thats what i used as a spare when i had a 2006 sealink trailer
simmo2001
26-03-2008, 07:19 PM
Thanks Dave.
SunnyCoastMark
26-03-2008, 07:35 PM
i think you will find its holden thats what i used as a spare when i had a 2006 sealink trailer
Or more specifically - Holden HT?
Mark
DAVE_S
26-03-2008, 08:19 PM
Or more specifically - Holden HT?
Mark
ht holden wheels are 14inch you will need to find a torana rim or any thing before ht .
13inch holden rims are getting hard to find .
if you do find one check the holes are not flogged out .
SunnyCoastMark
26-03-2008, 08:52 PM
ht holden wheels are 14inch you will need to find a torana rim or any thing before ht .
13inch holden rims are getting hard to find .
if you do find one check the holes are not flogged out .
Most boat Trailers with 13" Holden 5 stud rims are referred to as HT regardless if they actually are or not. It is just an industry reference.:) They are commonly supplied and readily available (new). I agree - secondhand (ex vehicle) - they are hard to come by.
Same with Holden 4 stud - it is actually a gemini stud pattern (100 PCD) but also used by Corolla, Hyundai, mazda bubble, etc. etc.
Ford is also Toyota, Magna, Honda etc, but still referred to as Ford hubs.
Mark
PADDLES
27-03-2008, 08:33 AM
dave, i got a steel rim for my 2004 sealink trailer last year from an early holden spares place down at holland park. i think it was about $50, all you've got to do is add a decent light truck tyre for around $110 and you're laughing.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.