Grand_Marlin
28-01-2008, 06:03 PM
G'day Guys,
I am just in the process of wiring up the twin 85 CV Yammies to my 560 Sharkcat.
I dont have a wiring diagram.
Everything is pretty straight forward, except for one red wire from the control box to the electronic tacho.
The black, yellow and green from the control box all go to corresponding wires on the tacho.
The yellow is bridged with blue at the tacho to run the backlighting.
The reds from the control boxes have factory fitted blank caps, and it doesnt look like they have been connected on the previous boat.
One harness has a red, the other doesnt (probably removed)
The existing red has a factory fitted 10 a fuse.
What is this red wire for?
Cheers
Pete
I am just in the process of wiring up the twin 85 CV Yammies to my 560 Sharkcat.
I dont have a wiring diagram.
Everything is pretty straight forward, except for one red wire from the control box to the electronic tacho.
The black, yellow and green from the control box all go to corresponding wires on the tacho.
The yellow is bridged with blue at the tacho to run the backlighting.
The reds from the control boxes have factory fitted blank caps, and it doesnt look like they have been connected on the previous boat.
One harness has a red, the other doesnt (probably removed)
The existing red has a factory fitted 10 a fuse.
What is this red wire for?
Cheers
Pete