PDA

View Full Version : Help with prop selection 87 Mariner 135



fender22
26-01-2008, 03:10 PM
Hi guys, I have a 87 Mariner (Merc) with a 48-78120-19 prop I want to replace. Very happy with the performance of the prop but it is getting pretty tatty and corroded and the blades have been reshaped and panel beaten several times.

One of the good people off ausfishing has offerred me a Quicksilver
48-16316-A5-19P which as far as I can see should be a 19 pitch 14 degree so theoretically should be the same as the prop I have (or is there more too it?).

I had a look around the web and couldn't find much info on either prop. Can someone tell me if this is basically the same as the prop I have now but SS?

Many thanks in advance

Blackened
27-01-2008, 12:00 AM
G'day

Best off ringing a merc dealer and asking them

Dave

BM
27-01-2008, 06:46 AM
If it measures 14 inches in diameter then yes it is the stainless equivalent of your 14 x 19 ally prop.