whichway
25-01-2008, 09:56 PM
Hi
I have one of these, with the pickup though the transom of my boat. It does the live bait tanks.
http://www.rule-industries.com/images/resized/201cw180.jpg (http://www.rule-industries.com/images/resized/201c-pc99.jpg)
I want to install a deck wash, and was wondering whether I could put it on the discharge of the live bait pump. The idea is that it would suck water through the live bait pump using the live bait pump pickup. I don't want to start the live bait pump when I am doing this, just suck the water through the pump when it is off. That way I would not have to drill another hole through the transom for the deck wash pickup.
If that won't work, can I get rid of the existing bait tank pump pickup. It looks like it is sikaflexed in place, so I would somehow have to drill out the pickup. Its about 25mm diameter, and the only thing I have in that diameter would be a spade bit, which wouldn't do the job very well. Filing out the sikaflex would be pretty difficult. Any ideas how to do that.
Finally, can I somehow use the one pickup for deck wash and live bait tank. Do I need two pumps or can you do it with one pump (want automatic deck wash with pressure sensor to start and stop).
Whichway
I have one of these, with the pickup though the transom of my boat. It does the live bait tanks.
http://www.rule-industries.com/images/resized/201cw180.jpg (http://www.rule-industries.com/images/resized/201c-pc99.jpg)
I want to install a deck wash, and was wondering whether I could put it on the discharge of the live bait pump. The idea is that it would suck water through the live bait pump using the live bait pump pickup. I don't want to start the live bait pump when I am doing this, just suck the water through the pump when it is off. That way I would not have to drill another hole through the transom for the deck wash pickup.
If that won't work, can I get rid of the existing bait tank pump pickup. It looks like it is sikaflexed in place, so I would somehow have to drill out the pickup. Its about 25mm diameter, and the only thing I have in that diameter would be a spade bit, which wouldn't do the job very well. Filing out the sikaflex would be pretty difficult. Any ideas how to do that.
Finally, can I somehow use the one pickup for deck wash and live bait tank. Do I need two pumps or can you do it with one pump (want automatic deck wash with pressure sensor to start and stop).
Whichway