bondy99
12-11-2007, 10:18 PM
G'day,
I may have posted this before sometime ago but things have changed since then.
Is there anyone in the Brisbane area that can do a small job of welding a small piece of zincanneal sheet onto the panel work of my car at a cheap price, still at uni fulltime and cant afford too much. I also had to make a metal box housing to accomodate the combined parking/indicator unit. This needs to be welded up, off the car and rivets removed and weld sections where rivets have been removed and grounded.
The job all up should take only 40mins to maybe 1 hour maximum.
It's difficult to take a good photo of the weld job or piece work that needs attention as my camera is the old 35mm Praktica and has been producing under-exposed film even though the settings are correct for ISO speed and light meter.
I live in Marsden. Peter
I may have posted this before sometime ago but things have changed since then.
Is there anyone in the Brisbane area that can do a small job of welding a small piece of zincanneal sheet onto the panel work of my car at a cheap price, still at uni fulltime and cant afford too much. I also had to make a metal box housing to accomodate the combined parking/indicator unit. This needs to be welded up, off the car and rivets removed and weld sections where rivets have been removed and grounded.
The job all up should take only 40mins to maybe 1 hour maximum.
It's difficult to take a good photo of the weld job or piece work that needs attention as my camera is the old 35mm Praktica and has been producing under-exposed film even though the settings are correct for ISO speed and light meter.
I live in Marsden. Peter