Need Advice On Boat Trimmer To Use

[Great White]

Hi Just finished building my new Bimini frame with a mate today for our boat and was wanting to know who is a good boat trimmer around the Redlands / Brisbane area. I am watching the dollars at the moment so wanted quality at a price if there is still such a thing ;)

I changed from the zip out roof to stand up and drive bimini to a custom made frame which will allow me to stand up and drive behind a clear screen or to remove and zip out the screen. If cost of covering the frame and clears is not to expensive I want to get full camper as well covers :D

Any thoughts and comments ?????

[timddo]

Greg,

My first boat was a trailcraft 4.85 with bimini and it cost $600 for side and front clears. It's not cheap. If you have a sewing machine. Herm can probably sew it up. Use nylon instead of cotton. Clears are $30 1by 2 meters and canopy material are about the same.

I'm getting clears on my new boat, once it's all complete, hopefully next week.

[DR]

Give Tony a call, he does a lot for dealers & does quality work.:thumbsup:

Moreton Bay Boat Trimmers
Unit 2 / 19 Thorne St Wynnum
Ph 07 3396 1617
mob 0402 755 189

[Great White]

Thanks for the advice guys will look into your suggestions :)

[reidy_g]

Give Tony a call, he does a lot for dealers & does quality work.:thumbsup:

Moreton Bay Boat Trimmers
Unit 2 / 19 Thorne St Wynnum
Ph 07 3396 1617
mob 0402 755 189

Ditto....just fitted out my new boat. Quality work.

[2DKnBJ]

GW
I have seen tony's work and it is top quality.Would suit you being on the southside.If you wanted to travel to the northside give Justin a call at Brisbane Boat Trim he is located at brendale.
Just a tip..If you get a clear front have a couple of sip windows put in it will save you taking the whole screen out. Cheers Dazza