help with converting to centre consol

[shabss]

i have a 4.3 clarke with a 40 horse yamaha enduro 2 stroke pull start tiller
i need advice on how to convert it to a centre consol
1. what are all the components that i need
2. where can i get it from preferably used
3. how much is it gonna cost me
4. does anyone have the components for sale

[timddo]

Chubby for one

It will cost ya approximately $1000 in cost

1. tiller to cable it ( i think)
2. cables
3. steering wheel and cable.
4. Centre consol box - aluminium
5. remote control box - you can find some secondhand ones
6. i think a rectifer to charge your batteries.
7. If it doens't have a starter motor, forget it cost too much.

Stones corner marine mite have some cheap parts, try their first , then boat wreckers. 702 control box

[elliven]

G`day,just curious but how much is too much on the starter motor side of things?

[shabss]

tim
what is '702 control box' you mentioned at the end of your post


Chubby for one

It will cost ya approximately $1000 in cost

1. tiller to cable it ( i think)
2. cables
3. steering wheel and cable.
4. Centre consol box - aluminium
5. remote control box - you can find some secondhand ones
6. i think a rectifer to charge your batteries.
7. If it doens't have a starter motor, forget it cost too much.

Stones corner marine mite have some cheap parts, try their first , then boat wreckers. 702 control box

[timddo]

thats the remote control box for the yamaha model.

Chubby, you should be able to buy a conversion kit from tiller to centre console. about $100 i think,

[reilly]

You be looking more than $1oo Yamaha console control box Approx $400 + With tilt & trim Switch $550 + as this depends who what where of course good luck getting a good second hand one if you do give me a bell there rare I'v given up