View Full Version : Brisbane nthside boat inspections
mik01
22-08-2007, 09:46 AM
All,
Looking at a boat on the nthside (private sale).
Any recommendations on a mobile marine engineer/qualified boat inspector?
Or will any boat shops come out to inspect boat and outboard for me?
cheers,
mik
THis topic came up abot 1-2 weeks ago and someones name was quoted then. I do inspections in Melb so I can't help you.
Cheers
mik01
22-08-2007, 10:13 AM
thanks BM,
I have already checked the forum and yes it was, however the bloke is based right down the sthside.
was quoted over $400 from marinematters, which I think is a bit steep. (they do not check motors either - have to get a marine mechanic for that).
BM - I noticed your price was around $160 and assumed I could get similar up here - just need a pointer in the right direction.
So...... can anyone point me there please???
finga
22-08-2007, 10:30 AM
Grand Marlin may be a consideration..he knows boats that's for sure :)
I was also going to recommend Grand Marlin.Couldnt go wrong there.He is in business.
David
mik01
22-08-2007, 02:13 PM
ok thanks all - any idea how I get in touch with the Grand Marlin himself?
:)
mik01
22-08-2007, 02:19 PM
no need to reply thx - have worked out how to pm him
cheers for the help!
sharkymark2
22-08-2007, 02:25 PM
I used a bloke on the Northside and he charged me $110 to go out and inspect an ebay boat. Turns out the info the seller didnt give was that the engine had overheated and instead of replacing both head gaskets had only replaced one. The pressures were different. I declined to buy the boat at the bid price because he had withheld info when I had asked him if there had been any problems. He had me barred from ebay . Oh well. I think there was only 1 dealer over there .
4ward42
28-04-2008, 11:29 AM
try http://www.completeboatinspections.com.au/
griz066
28-04-2008, 12:18 PM
All,
Looking at a boat on the nthside (private sale).
Any recommendations on a mobile marine engineer/qualified boat inspector?
Or will any boat shops come out to inspect boat and outboard for me?
cheers,
mik
Expect to pay around $19-$25 per foot of length a mate just got one done on a 36ft flybridge cost him $700 but worth every penny
death_ship
28-04-2008, 04:12 PM
clean out your PM's Finga
4ward42
20-05-2008, 10:19 AM
:D www.completeboatinspections.com.au (http://www.completeboatinspections.com.au) :D
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.