PDA

View Full Version : Threadmaster Lite



Ross van Enckevort
09-08-2007, 11:26 AM
Guys,
I have the first small shipment in of the new finish and it is as good as all the hype in the US. It is a lot thinner, longer working time and hardly any bubbles at all when applied. If you are after a lighter build finish this is definitely worth trying. I had come in with the Lite also some strips of exotic burl cork in different thickness' those of you into your handles will find endless combination possibilities with these. Check them out on the front page.

Regards,

Ross. www.therodworks.com.au