which paint ?

[maccaril]

I have had some structural work done on my edgetracker and the metal is exposed. which type of primer/paint should i apply
thanks
rob

[Noelm]

depends on what you are after, to do it properly, you need some etch primer, then some sort of top coat, but if you are just after protection for the new material, you may just be able to brush some on to cover it instead of the full on rub back and spray job

[lippa]

to make things simple if its a small area. internatioal paints make a brushable primer, and a polyurethane top coat called brightside from memory. most chanderly stores stock this brand of paint.!!!
if spraying totally different prosedures. pm me for advice on that.

cheers

lippa

[maccaril]

Thanks Lippa and Noelm
It is just a small area so I will go with a brush on
Rob