PDA

View Full Version : Coating underbinding & overbinding



Trevor2
06-07-2007, 04:48 PM
Is it better to coat underbinding before fitting the ring and overbinding? Or underbind and overbind and then coat.

Does it matter if thin or thick coats are used for a two stage or single stage coating?

This is related to 10-15kg and 15-25kg overheads rods - if that makes any difference.

Thanks for any advice.

Kind regards Trevor

Rodman
07-07-2007, 04:11 PM
i first put a coat of color preserver on the under bind then bind the runner then ue color preserver then place a thin coat of epoxy
i always try to give a total of three coats of epoxy

Ken
Frazorodz