View Full Version : Removable windscreen on half cabin
Does anyone have a half cabin boat with a removable windscreen that allows the boat to fit under the garage door for storage ? If so, have you got a system that allows quick removal/replacement of the windscreen ?
Any ideas would be very much appreciated.
GES
Brumby
08-04-2007, 02:31 PM
Hi Ges
I see Barcrusher (plate alu) advertise something along the lines of what you are after, www.barcrusher.com.au (http://www.barcrusher.com.au) . Perhaps you could have a look at their system and adapt it?
Roughasguts
08-04-2007, 02:56 PM
How much does it need to come down by.
I take off me jockey wheel and drop the trailer draw bar on a dolly with 4 small castors on it.
It just clears the roller door, Takes a good 5 inchess off the height.
Sea-Dog
09-04-2007, 10:59 AM
Hey GES,
I have my windscreen foldable just so that I can get it into my garage with a tilting door.
I had to modify the screen a bit by riveting a bit of 50X3 mm aluminium flat from the top of the windscreen frame, to the bottom of the frame. As well as strengthening the corners of the screen with L shaped brackets.
I have a screw-type catch in the middle of the screen that hooks into its partner mounted on the top of the cab. (see photos - easier than explanations)
I bought the ally flat at bunnings and the catch at Whitworths.
Only hassle is I have to unclip the bimini from the windscreen to fold the screen and bimini back.
I have a couple of other images that can be seen here: http://members.optusnet.com.au/sea-dog/images/ausfish/screen/
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.