PDA

View Full Version : need help big time



paul vonderwall
04-04-2007, 07:17 AM
paul here i am after recipe on sabre 195-6h for baitcaster as my computer crashed last week and lost a lot of recipes
i would like complete recipe from top to bottom please thank you paul

sandyd
12-04-2007, 03:14 PM
Not sure but you may find something on this site usefull.


http://www.fujitackle.com.au/recipes.htm

DR
12-04-2007, 05:08 PM
here is one i found in my box of recipes for a Sabre 196-6 makes a 6-8kg baitcaster.. was given to me by a fella that knew his stuff, never did build one myself. but it is a starting point. i wouldn't trim without testing it untrimmed, trimming will give a harder tip..

cut 60mm from tip
guides fuji hvsg
tip #8 2.8 pipe
tip to 1st guide #8 115mm
1st to 2nd guide #8 120mm
2nd to 3rd guide #10 125mm
3rd to 4th guide #10 130mm
4thto5th guide #12 138mm
5th to 6th guide #16 172mm
6th to7th guide #20 250mm
reel seat #20

paul vonderwall
12-04-2007, 06:29 PM
thanks dr for that i will try both ways first ok but the problem my computer crashed and i lost a lot of work it happend while i was coping them a disc thanxs again

paul vonderwall
12-04-2007, 06:36 PM
here is one i found in my box of recipes for a Sabre 196-6 makes a 6-8kg baitcaster.. was given to me by a fella that knew his stuff, never did build one myself. but it is a starting point. i wouldn't trim without testing it untrimmed, trimming will give a harder tip..

cut 60mm from tip
guides fuji hvsg
tip #8 2.8 pipe
tip to 1st guide #8 115mm
1st to 2nd guide #8 120mm
2nd to 3rd guide #10 125mm
3rd to 4th guide #10 130mm
4thto5th guide #12 138mm
5th to 6th guide #16 172mm
6th to7th guide #20 250mm
reel seat #20 hi dr what pipe /trigger seat what length for grips please

DR
12-04-2007, 07:27 PM
hi dr what pipe /trigger seat what length for grips please

#20 trigger

rear 200mm - fore was 250mm in recipe, but i would personally prefer a bit shorter..

paul vonderwall
12-04-2007, 08:42 PM
thanks dr for helping me been fishin at all where are stated