Prop, Stainless 4Blade

[Vitamin Sea]

Genuine OMC Renegade Offshore

14 1/4 Dia x 19" Pitch

No further use

Very good condition, $475.00

[chainsaw]

How many spline is it, whould it be suitable for 115hp 4 stroke suzuki?

[Vitamin Sea]

Cheyne

Don't know if Johnson / Evinrude props are inter-changeable with Zuk 4 bangers, perhaps it's worth a call to a dealer?

As far as suitabilility goes, maybe, wholly depending on what boat your pushing, 19" pitch is usually more suited to larger HP, but as I said, depends on the boat and what revs you can achieve with the prop.



Bill

[Vitamin Sea]

For any that are interested, it's got 15 splines. great prop, worth lot's of $$ new

Regards

[chainsaw]

Its on a 5.2mtr side console has a 3x14x19 allum on it now and pulling over 6000
Dont know if will be too big for it maybe someone has some experience. Has to come back between 5-6k and will only run it about 4500. Im in Townsville maybe someone has a prop I could try?

[trueblue]

A 4 blader of the same pitch as a 3 blader will knock your revs back 250 - 500 revs. depending on motor / engine height / engine torque etc

[chainsaw]

Hi Bill.
Spoke to dealer today. would not be suitable for my motor as have a 2.59 final drive. Thanks anyhow

Rod

[Vitamin Sea]

No problem Rod

Any other takers out there? willing to talk on price.

Was off my 175 Johnson, now have Merc, obviously does not fit.

Excellent condition 4 blade stainless prop, most suitable from about 135hp up, depending on boat.

Gathering dust.

Regards

[Vitamin Sea]

Anyone interested?

[liltuffy]

Hi Bill, I'm intetested, send me a PM, sounds like a graet deal to me.

Craig in the V-Sea