PDA

View Full Version : Cork Supplies



LHenno
19-02-2007, 05:19 PM
Hi guys

i was just wondering where you guys get your cork from, ive been ordering the already formed cork grips, but i really wanna shape my own, so i need to source a supply of cork, ive seen those cork rings you can order but they work out really dear so im looking for a cheaper alternative.

Thanks Luke

Bearclaw
20-02-2007, 07:52 AM
It all depends on the quality. This can be hidden by the use of fillers in preshaped and rings.
To make some cheaper grips which are composite use a hole saw and some good quality cork tiles another thing you can use is those cork sanding blocks a dollar or two at bunnings use the hole saw on them.

Bearclaw
20-02-2007, 07:55 AM
Sorry meant to say once cut out glue them together on a waxed piece of threaded bar with some washers and nuts, then turn them in a lathe, drill etc.

sid_fishes
20-02-2007, 07:55 PM
myles , you keep giving up all your good ideas and there will so many rod builders out there you wont be able to earn a living