Blackened
20-01-2007, 11:45 AM
G'day
Have another busted rib in the tinny, where the rib joins the inside chine, the weld has cracked.
Also have a very small hole caused by a rub through on the bottom sheet that needs to be fixed.
Boat is a 12' horizon, so i'm assuming 1.6mm sides and 2mm bottoms sheets.
Is there anyone local to the south east side of brisbane around the general capalaba area? Anyone at home with the right equipment, would only be a half hour job.
Dave
Have another busted rib in the tinny, where the rib joins the inside chine, the weld has cracked.
Also have a very small hole caused by a rub through on the bottom sheet that needs to be fixed.
Boat is a 12' horizon, so i'm assuming 1.6mm sides and 2mm bottoms sheets.
Is there anyone local to the south east side of brisbane around the general capalaba area? Anyone at home with the right equipment, would only be a half hour job.
Dave