View Full Version : 4m hornet trophys
looking into storage options for deepcycle battery on my 4m hornet ,thinking below floor like start battery, any advice or pic of other member greatly appreciated cheers Yamp
Fishin_Dan
18-01-2007, 11:49 AM
JT has one of these. He should be able to help you out.
G'day Yamp,
I have my cranking battery in the spot under the floor and the deep cycle for the electric in a battery box that sits on the floor just in front of the extension I did to the front casting deck. The battery box is held down with a strap. I am at work at the moment, when I get home I'll post up a pic for you.
Cheers
John
Hey Yamp,
Here's the pic, you can get the box and strap from any chandlers.
Cheers
John
thanks for the replys jt and dan,I had a similar set up with box screwed to floor but was thinking of doing something like the cranking battery box to get it out of the way ,looks like you have modified your casting deck jt?looks good any pics thanks again Yamp
No worries Yamp - what I think I'll end up doing is extending the casting deck further back but having the front open so I can keep the battery under the extension and slide tackle bags and things under and out of the way. Here is a link to some some picks of the reno from and old post. - http://www.ausfish.com.au/vforum/showthread.php?t=67331&highlight=400+hornet+reno
Hope that link works - if not just do a search on 400 hornet reno.
Cheers
John
TheSaint
19-01-2007, 08:29 AM
This is a photo of the batteries in my 390 Hornet..
jt I have tried to view photos of your reno with no luck If you get a chance could you post some pics ,thinking of framing in a box in floor like cranking battery box, thanks again Yamp
Hi Yamp,
Sorry for the delay, here are some pics.
John
thanks for the pics jt yamp
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.